产品

Products

CNC Sand MakingCNC Sand MakingCNC Sand Making
CNC Sand MakingCNC Sand MakingCNC Sand Making

CNC Sand Making

ZSSL model CNC heavy sand making machine, is for the middle and high hardness stone; sfine crusher. Special for the river stone, quartz ,gray-stone high hardness stone  It is the first choice of the crusher equipment. 

Description

Usage and Application

ZSSL model CNC heavy sand making machine, is for the middle and high hardness stone;s fine crusher. Special for the river stone, quartz ,gray-stone high hardness stone  It is the first choice of the crusher equipment.

Working Principle

The raw material massive ore through the feeder hopper into the sub-feeding plate of the crusher cavity,using the sub-feeder’s centrifugal pull evenly throw the material towards barrel shell’s all round , impact heavily with impacted plate installed on the inner wall, all the material impact each other, make them broken or produce lots hair crack, then the material go into the cone rotor cavity, drop in spiral shape through the cone space, after impacting ,extruding, the crack ore been crushed further. The material hit by the hammer head in the cone rotor cavity, the high speed material impact with impacted plate again, the material flow impact each other after hitting ,impacting, cutting, extruding and smashing,thereby improve the crusher ect.

Last,the material go into the cylindrical rotor cavity,the smash material’s corner angle been grind,kneaded,plastic, the material fine crusher further until the requirement fineness.

Feature

1. The  more reasonable design structure,multilayer rotors design into ladder shape, impact plates are designed in tooth shape pressure angle.The material are running according to the collision trajectory science.
2. The wearing parts made by the high hardness alloy, The working lifetime improve two to three times than the other crusher equipment and wearing part’s cost reduce five to ten times.
3. Use there channel combined seal structure with the reliable automatic and quantitative lubrication system, make sure  the bearing working-life to improve  two to there times,the dust-proof effect more better.
4. Changing  more simple and faster for the wearing part.
5. The main shaft rotary speed use frequency control,it is flexible adjustment for the output size. It can improve the finish products utilization rate.
6. The transmission and crusher is whole structure, smaller footprint, low noise , smooth operation.

Technical Parameters

Specification

Dia Of Barrel

(inch)

Feeder Size

(mm) 

Output Size

Screening Rate

(%)

Process Capacity

(t/h)

 

 Motor Power

(kw)

 Overall Size

L x W x H (mm)

ZSSL-29

29

<30

  adjustable under 5mm

≤10%

5-20

45

2100×1000×1700

ZSSL-39

39

<35

adjustable under 5mm

≤10%

10-40

75

3100×1250×2200

ZSSL-49

49

<40

adjustable under 5mm

≤10%

20-60

132

3200×1550×2800

ZSSL-59

59

<45

adjustable under 5mm

≤10%

40-100

160

3500×1800×2900

ZSSL-69

69

<50

adjustable under 5mm

≤10%

60-150

200

4000×2050×31000

ZSSL-79

79

<50

adjustable under 5mm

≤10%

80-180

132×2

5720×2350×3100

 

CONTACT US

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.

  • *
  • *
  • *

CONTACT US

+86-0371-86197999
info@seasunmac.com
+86-138 3826 9870